Yaesu FTDX-3000
 
Digital setup for Yaesu FTDX-3000 to Macintosh computer
 

Computer system used for this set up: Apple Macintosh iMac late 2009 model; system 10.9.5


The USB drivers can be downloaded at:

http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx#mac


Hardware:

USB cable type B — from radio to computer only — no interfacing devices.


Radio settings:


037 GENERAL CAT SELECT, set to USB

038 GENERAL CAT RATE, set to 19200bps

040 GENERAL CAT RTS, set to ENABLE

065 MODE CW PC KEYING, set to RTS

067 MODE DATA DATA MODE, set to PSK or OTHERS

069 MODE DATA OTHER DISP (SSB), set to 100Hz

070 MODE DATA DATA IN SELECT, set to USB

076 MODE DATA DATA MIC GAIN, set to 5

077 MODE DATA DATA OUT LEVEL, set to 20

078 MODE DATA DATA VOX GAIN, set to 40


Set radio in DATA USB mode


FLDIGI settings (under Configuration tab): FLDIGI version 3.2

Set mode to PKT-U, then set your Op_Mode.


Credits:

http://dcasler.com/2016/10/31/ftdx-3000-menu-settings/

http://w1hkj.com


Subject to change.


Not responsible for these settings. Please read your manual and ask questions if in doubt.


Have fun!


de Curt, K3URT